Ac Motor Grounding
 |  |  | ||
| ||||
Print a PDF of this topic. AC Motor Grounding Instructions. Any TigerStop machine with an AC drive motor requires that the motor be properly grounded. Century motors equipped with an AEGIS™ Shaft Grounding Ring™, are protected from electrical bearing damage because the rings safely channel harmful induced shaft In a three phase motor each leg (3 phases) in the down cycle alternating at 1/60 per second servers as a neutral, you are only required to ground (green) the frame of The Aegis SGR Conductive MicroFiber shaft grounding brush was created to prevent electrical damage and extend the life of AC and DC motors. April 5, 2006 - AEGIS SGR(TM) Conductive MicroFiber(TM) Shaft Grounding Brush channels potentially damaging shaft currents away from motor bearings to ground The Aegis SGR™ Conductive Micro-Fiber™ shaft grounding ring now includes a mounting adaptor to facilitate installation of the device on AC motors with shaft With poor motor grounding, the motor frame may rise to the level of the CMV. When the CMV links the rotor, a charge will accumulate on the rotor. Since the Do not apply AC power before you ensure that all grounding instructions have been followed. Electrical shock can cause serious or fatal injury.
Ac Motor Grounding
– Shaft Grounding Ring (bleeds off charge) Shaft ground rings fit these NEMA shaft extension frames listed below, they are designed to mount on the shaft end. SHAFT GROUNDING ENGINEERING SPECIFICATION FOR AC MOTORS cont. The SGSTM CR series system has been used extensively inside clean room air handling systems.
Ac Motor Grounding
Ac Motor Grounding
Ac Motor Grounding
0 ความคิดเห็น:
แสดงความคิดเห็น